Top Tier Imports

Marketplace => Parts for Sale/Wanted/Trade => Engine, Drivetrain and Exhaust => Topic started by: tytanium on September 12, 2017, 08:36 PM

Title: FS: CoolingMist CMGS With Autolearn Failsafe methanol injection kit
Post by: tytanium on September 12, 2017, 08:36 PM
Selling my CoolingMist CMGS With Autolearn Failsafe kit. The pump, tank, controller/gauge and failsafe box are from @Nirusan (http://toptierimports.com/index.php?action=profile;u=3033) 's old ST so you know they were well taken care of. Since buying them I have not used them. The checkvalve, checkvalve fittings, tubing, nozzle holder and Devils Own D07 nozzle are all brand new never been used. Also will come with 100ft of 24 gauge wire and 100ft of 16 gauge wire. Online this kit goes for around $780 + shipping and comes with a solenoid instead of the upgraded checkvalve.

A little about the kit:

The Coolingmist Universal Water-Methanol Injection (WMI) kit with Autloearn failsafe is a system that was designed for the safety minded customer that wants an easy to install system with the most comprehensive failsafe on the market. Coolingmist spent many months developing a system that promises to change the way you think about complicated failsafes and hard to install systems. A traditional failsafe typically use flow sensors that often fail in the field and require the user to manually setup the safe operating range of the system. This causes many frustrating false positive triggers of the failsafe that forces users to shut off the failsafe altogether defeating its purpose.

The Coolingmist failsafe works by monitoring the pump duty cycle ('how hard the pump is working'), and this provides a reliable method of determining any potential problems with your WMI system without having to place a sensor in the water/methanol stream. In the event of a leak or burst line the WMI pump will require less power and the failsafe will recognize this thus triggering a fault code. If your nozzle becomes clogged the opposite will occur, the pump will need to work harder, and the failsafe will recognize the higher demands and trigger another fault code.

With the Coolingmist Universal Failsafe kit you are protected from low flow (25% duty cycle) to full system flow (100% duty cycle) and all points in between. In addition to that the Coolingmist system has an industry first AUTOLEARN feature. Install the system and it will learn your operation parameters automatically.



Looking to get $700 for everything. If you own a Speed3 or Speed6 I can include a Damond Motorsports throttle body spacer with injection ports for an extra $50.

Sale includes everything in photo
(http://i65.tinypic.com/15eager.jpg)
Title: FS: CoolingMist CMGS With Autolearn Failsafe methanol injection kit
Post by: tytanium on September 22, 2017, 03:07 PM
BUMP Price drop to $650
Title: FS: CoolingMist CMGS With Autolearn Failsafe methanol injection kit
Post by: tytanium on September 27, 2017, 12:33 PM
FIRST SNOWFALL SALE

Dropping the price of the full kit to $500 until the first snowfall of the season then price will be adjusted back up! That is about $400 off the regular price for all of this.

BUMP
Title: FS: CoolingMist CMGS With Autolearn Failsafe methanol injection kit
Post by: tytanium on September 30, 2017, 10:31 PM
BUMP
Title: FS: CoolingMist CMGS With Autolearn Failsafe methanol injection kit
Post by: tytanium on October 05, 2017, 10:46 PM
BUMP
Title: FS: CoolingMist CMGS With Autolearn Failsafe methanol injection kit
Post by: tytanium on October 09, 2017, 01:47 PM
BUMP