Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - tytanium

Pages: 1 2 3
Cars for Sale/Wanted/Trade / FS: 2007 Mazdaspeed3
« on: September 30, 2017, 07:55 PM »
YEAR, MAKE & MODEL: 2007 Mazda Mazdaspeed3
CURRENT MILEAGE (SPECIFY KMS OR MILES):  212,100kms as im typing this. Car will be driven until end of October then will go into storage until a buyer is found.
COLOR (EXT/INT): pearl white / black
TRANSMISSION: 6spd manual w/ LSD
CONTACT VIA (E-mail, PM, phone number, etc.): PM or text 204-470-5746
REASON FOR SELLING: Getting out of the car scene for awhile to focus on different things

OPTIONAL INFORMATION: Car was bought in 2013 from Gerry Gordons Mazda with 123XXXkms. Oil has been changed every 5000kms with Pennzoil Platinum and either a Wix or Napa Gold filter. As of Sept. 27/17 the car had a few things fixed in preparation to sell. Those things included: Rear main seal, clutch plate, pcv valve, slave cylinder, front driver axle and a couple exhaust leak fixes.


HISTORY OF ACCIDENTS? (IF YES, DETAILS): One accident in my possession. Was rear ended and a new bumper was installed and painted by Vernaus Autobody.

HISTORY OF PAINT/BODYWORK? (IF YES, DETAILS): Original paint that I know of besides the rear bumper. Front bumper could use some body work and paint and there is a rust bubble forming on the hood.


Wheels: - 17x9 +38 Rays Gramlights 57DR (one wheel has slight curb rash)
            - Project Kics Caliber 24 lugnuts

Tires: - 245/40/17 Continental ExtremeContact DW (will update with amount left)

Suspension: - Koni Yellow Shocks/struts
                  - Corksport lowering springs
                  - Moog front and rear endlinks
                  - Hotchkis rear sway bar
                  - SPC rear camber arms

Brakes: - Centric Premium front and rear rotors
            - Powerstop Z23 brake pads
            - Stoptech SS braided brake lines

Exterior: - rear fenders rolled and slight pull
             - blacked out headlight insides
             - DDM Tuning 6500K HID bulbs
             - Evil M emblems
             - Spoiler lip add-on
             - DG Motorsports carbon fiber grill cover
             - Carbon fiber mirror covers
             - windows tinted
             - license plate relocate
             - Rally Armor mudflaps
             - Tiburnt license plate hardware (front and rear)
             - carbon fiber vinyl wrapped sideskirt extensions

Interior: - Maisonvi piston style weighted shift knob
             - JBR solid shifter bushings
             - Defi Racer boost gauge
             - JBR short shifter
             - suede shift boot

Engine: - ATP 2871R turbo @ 22psi (340whp/320wtq on Speed factor dyno in 2016)
            - E-Tuned on 94 octane by Will Dawson of Purple Drank Tuning out of Maryland
            - V3 Accessport
            - Autotech high pressure fuel pump internals
            - J2 Engineering 3" catless downpipe
            - CP-e Nexus 3" catback with resonator delete
            - Street Unit 3" testpipe
            - Damond Motorsports rear motor mount
            - JBR passenger side motor mount
            - Gofastbits bov
            - Cobb shift weight
            - Treadstone TR8L intercooler
            - JBR intercooler piping
            - Damond Motorsports powersteering cooler
            - Damond Motorsports catchcan w/ VTA addition
            - NGK 1-step colder plugs (changed each spring)
            - Ramfab 4" intake w/ Treadstone cone filter
            - coolant bypass
            - Damond Motorsports EGR delete
            - Bosch 3-bar map sensor
            - MAC 3-port electronic boost control solenoid
            - Stratified Tuning Guardian Angel V3 overboost protection

Audio: - Pioneer AVH-X2800BS headunit
          - JL Audio C3-650 components w/ tweeters
          - Kenwood KFC-X683C eXcelon rear speakers
          - JL Audio 500/1 V2 Slash amp
          - JL Audio 300/4 V2 Slash amp
          - JL Audio 10w3v3 10"subwoofer
          - all 4 doors, trunk floor and trunk hatch have been dynamatted
          - 0 gauge and 4 gauge wire used for power and amps

Extras: Compustar 2WG9R Command Start

Compression test done Oct.5/17 -  1     2      3     4
                                                 166  168  168  182
                                                 164  171  170  179

I am probably forgetting some info but if anyone interested has any questions feel free to PM or text me.

Will also come with any stock parts I still have laying around

Will update with more recent photos and more photos when I have a chance to wash the car.


Other for Sale/Wanted/Trade / FS: Home theatre audio
« on: September 16, 2017, 05:11 PM »
Had this setup in my old bedroom when I lived at home. Moved into a condo a few years ago and has been at my parents ever since. Everything works perfect and is in near mint to mint condition.

Package includes:

Center Channel: Klipsch Icon VC25 (has small tear in fabric on right edge, does not effect performance in any way)
Pair of Tower Speakers: Klipsch Synergy F1
Pair of Rear Speakers: Studio Acoustics SA6.6B
Receiver: Denon AVR-590 w/ remote
Subwoofer: Polk Audio PSW10

Perfect for a rec room or man cave. Pickup only. Pickup will be in North Kildonan.

Looking for $450    $400  $300

Selling my CoolingMist CMGS With Autolearn Failsafe kit. The pump, tank, controller/gauge and failsafe box are from @Nirusan 's old ST so you know they were well taken care of. Since buying them I have not used them. The checkvalve, checkvalve fittings, tubing, nozzle holder and Devils Own D07 nozzle are all brand new never been used. Also will come with 100ft of 24 gauge wire and 100ft of 16 gauge wire. Online this kit goes for around $780 + shipping and comes with a solenoid instead of the upgraded checkvalve.

A little about the kit:

The Coolingmist Universal Water-Methanol Injection (WMI) kit with Autloearn failsafe is a system that was designed for the safety minded customer that wants an easy to install system with the most comprehensive failsafe on the market. Coolingmist spent many months developing a system that promises to change the way you think about complicated failsafes and hard to install systems. A traditional failsafe typically use flow sensors that often fail in the field and require the user to manually setup the safe operating range of the system. This causes many frustrating false positive triggers of the failsafe that forces users to shut off the failsafe altogether defeating its purpose.

The Coolingmist failsafe works by monitoring the pump duty cycle ('how hard the pump is working'), and this provides a reliable method of determining any potential problems with your WMI system without having to place a sensor in the water/methanol stream. In the event of a leak or burst line the WMI pump will require less power and the failsafe will recognize this thus triggering a fault code. If your nozzle becomes clogged the opposite will occur, the pump will need to work harder, and the failsafe will recognize the higher demands and trigger another fault code.

With the Coolingmist Universal Failsafe kit you are protected from low flow (25% duty cycle) to full system flow (100% duty cycle) and all points in between. In addition to that the Coolingmist system has an industry first AUTOLEARN feature. Install the system and it will learn your operation parameters automatically.

Looking to get $700 for everything. If you own a Speed3 or Speed6 I can include a Damond Motorsports throttle body spacer with injection ports for an extra $50.

Sale includes everything in photo

Other for Sale/Wanted/Trade / FS: cheap watches
« on: June 10, 2017, 01:39 AM »
selling 3 watches that don't get any wrist time.

all are mint condition and have been worn a max of 5 times.

They are a Guess and a Tommy Hilfiger

$50 each or take both for $80

Audio, Video & Electrical / 1/0 ring terminals local?
« on: April 13, 2017, 02:26 PM »
anyone know where to find some 1/0 ring terminals locally?

Other for Sale/Wanted/Trade / FS: cheap RH hockey sticks
« on: February 18, 2017, 06:42 PM »
I know the hockey season is almost over, but for those who are looking to next season or summer hockey

selling off some that are just sitting around. deals for multiple sticks. if you want any photos of any just ask

all sticks are RH and are 62.5" from floor to top

 1) Reebok 20k shaft w/ 20k blade

    - dual grip

    - 100 flex

    - Crosby curve



2) Winnwell GX-8 brand new cut down but never used

    - 85 flex

    - grip

    - PS119 curve



3) Sherwood T90

    - grip

    - 95 flex

    - PP88LS curve



4) Sherwood T100

    - grip

    - 95 flex

    - PP26 Stastny curve



5) Easton Stealth CX

    - grip

    - 100 flex

    - E3 curve

    - tape residue on shaft, nothing major


Wheels and Tires / FS: Michelin X-Ice Xi3 tires on Mazda 3 wheels
« on: November 21, 2016, 02:59 PM »
205/50/17 Michelin X-Ice Xi3 used for half a winter. Stored in a shed at all other times.

04-06 Mazda 3 wheels. not bad condition for beater wheels. can get actual photos for those interested (this photo is just from the internet)
2004-2006 OEM Mazda3 17-inch 5x114.3
 Width - 6.5 inches
 Offset - 52.5mm

Wheels & Tires together: $780
Wheels alone: $200
Tires Alone: $600

Frederique Constant FC-303MC3P6

will edit the ad with actual photos and more info tomorrow when I have more time.

I am the 2nd owner of this watch

Comes with original box and all documentation including original receipt of around $1000us

Has very small blemish on bezel, was near impossible to actually pick up on camera

Looking for $420

I have 10 other watches that get more wrist time and this just seems to sit.

part number W53287

Whiteline Front Control Arm Bushings Lower Inner Rear Mazdaspeed 3 2007-2013 / Ford Focus ST 2013+

never used. just opened the bag to look at them


Other for Sale/Wanted/Trade / Bunch of computer stuff
« on: July 24, 2016, 11:38 PM »
Old computer:
- Cooler Master Elite 330 case
- Sapphire ATI Radeon X1950XT video card
- 600W Cooler Master powersupply
- 2 sticks of 2gb OCZ Platinum ram
- Asus P5B motherboard
- lightscribe cdrom dvd burner

Havent turned it on in years. Worked the last time I had it on. Comes without a harddrive.

$60 for the whole thing

Cooler Master Stryker case
- lots of info on the case can be found here
- Mine has been modified: added another cooler master cage allowing for a 3x 120mm fan frontward setup, can also now hold 12 harddrives, bottom tray no longer holds a small case for bolts: it has been modified to hold and hide your cdrom


basic Intel heatsink fan


2 Cooler Master 120mm fans

$5 each


Exterior / FS: Rebirth Detailing complete car revival gift cert
« on: June 02, 2016, 09:18 PM »
I won the Rebirth gift cert at Spring Awakening. I would need a bunch of stuff repainted before I could even see myself using it so I'd rather it went to someone who can use it.

Was told it was for the $500 revival package. It expires Dec.31 / 2017

Looking to get $400 for it and am pretty firm on the price

I won the Rebirth gift cert at Spring Awakening. I would need a bunch of stuff repainted before I could even see myself using it so I'd rather it went to someone who can use it.

Was told it was for the $500 revival package. It expires Dec.31 / 2017

Looking to get $400 for it and am pretty firm on the price

Wheels and Tires / FS: 235/45/17 Hankook Ventus V12 Evo tires
« on: April 24, 2016, 11:07 PM »
FOR SALE: Hankook Ventus V12 Evo (K110)

- SIZE: 235/45/17
- Ultra-High Performance
- Speed rating: Y
- Load Index: 97
- 3 tires have manufacturing dates of 3312, the other is 3612
- Plenty of tread left on all tires
- 1 tire has a nail in it that I was told to leave in until it got remounted. easily fixable.

More info about the tires here:

PRICE: $220 for all 4
Contact: PM here.


Wanted / WTB: 07-09 Mazdaspeed 3 hood
« on: March 07, 2016, 01:13 AM »
as title says, looking for a hood for a 07-09 mazdaspeed3. color doesn't matter but crystal white pearl is preferred

Off Topic / Best pizza?
« on: March 04, 2016, 10:21 PM »
looking to try some pizza from places I've never tried before. whats the best spot for pizza local you've found?


As title says. I have an individual ticket for sale for tomorrows Disturbed concert. I bought 2 for my girlfriend and I but it turns out she has to work now and will be unable to attend. The seat would be in section 219 Row 2 Seat 9 or 10

Looking to get $60

Interior and Audio / FS: Blox 490 Matte Neochrome 10x1.25
« on: December 06, 2015, 11:28 PM »
Bought brand new from SpeedFactor in 2013 for $50+tax. Its is in mint condition. Comes with locking nut and in original box.

The 490™ Spherical is CNC-machined from high grade, stainless steel.  Each measures 50mm and is counter-weighted to 490 grams.

10x1.25: Hyundai, Infiniti, Mazda, Mitsubishi, Nissan

Looking to get $40

not sure what kind of market there is here for speed stuff, but what the hell.

Parts for sale:

- Valvecover off a 07 speed3. comes with gaskets and bolts. $80

- K04 turbo. Was non-smoker when I took it off. Im the 2nd owner of the car so I have no idea if this is the original turbo or if it had been replaced once already. No lines. No bolts. Was running strong when it was replaced with a GT2871r. $100

- OEM downpipe. pretty self explanitory. $60

All prices are obo.

Wheels and Tires / FS: 17x8 +45 gold RPF1's (UPDATED WITH PHOTOS)
« on: October 23, 2015, 03:14 PM »

Were bought brand new from 1010tires in i believe November of 2013.

Specs: 17x8, +45 offset, 5x114.3 NO TIRES. IM KEEPING THE TIRES FOR MY NEW WHEELS

Condition: 1 wheel is still mint. The other 3 have curb damage. (1/4" rash on one, about 2 spots with 4" of rash on another, and the last is the worst of them having rash about 60% of the way around and a small chunk out of the lip)  (SEE PHOTOS)
I have driven with said damage for over a year. Wheels are, im almost positive, very fixable.

Reason for selling: Looking to change up the look for next season.

Looking to get $620 for the set of 4

Trades: Looking to go 17x9 +45. The only wheel im really interested in is 5Zigen FN01R-C in those specs. If you have a different set of wheels in those specs and want to trade feel free to offer.

Car Shows & Other Events / Speed Factor dyno day
« on: August 17, 2015, 12:09 PM »
didnt see anything from @Speed Factor on here yet, so thought id post this up. was a great time last year

Journals / 2007 Mazdaspeed 3
« on: August 16, 2015, 12:11 AM »
inspired by Nirusan's journal I decided to finally make one for myself.

2007 Mazdaspeed 3

On September 27th, 2013 I was involved in a bad accident with a semi which totaled my 2008 Altima Coupe. It was a great car that never gave me any issues but a large part of me was glad I now had a chance to get into a car that was more "me". After getting my writeoff check from MPI the hunt was on for a replacement.

I had a short list of requirements I wanted the new car to have: - 4 doors
                                                                                             - turbo
                                                                                             - over 200hp stock
                                                                                             - 5 or 6 speed manual
                                                                                             - white

After a lot of looking around I came across an 07 Mazdaspeed 3 at Gerry Gordons Mazda. It fit every requirement along with me loving the look of it and it was mine a short time later.

Like many others I told myself "wheels and tires, exhaust, maybe intake and that's IT"...ya sure.

Current mods are:

- tinted windows by Executive Tint
- Evil M emblems painted gold
- Well Visor smoked window visors
- DG Motorsport carbon fiber moustache
- shorty antenna
- yellow fog light overlays
- Rally Armor mudflaps
- TB Performance front plate relocate
- side moldings removed
- front lip
- rear spoiler lip
- personalized plate "0 RWHP"

- suede shift boot
- broadway mirror
- Blox 490 matte neochrome shift knob
- Tomei Duracon shift knob
- Block8head vent gauge pod
- Defi Racer red 52mm boost gauge
- MSD Dashhawk
- carbon fiber vinyl wrapped interior parts

Wheels & Tires
- 17x8 gold RPF1's, +45
- 235/45/17 Hankook V12's
- purple ebay lug nuts
- 17x9 +38 Rays Gram Lights 57DR in GunBlue
- tires to be updated shortly
- Project Kics Caliber 24 lugs

- Damond Motorsports rear motor mount
- Damond Motorsports power steering relocate
- Autotech high pressure fuel pump internals
- JBR passenger side motor mount
- GoFastBits bov
- HTP full 3" intake
- AEM filter
- CP-e Nexus 3" catback w/ resonator removed
- Street Unit 3" testpipe
- Cobb Accessport w/ 94 octane tune by William Dawson of Purple Drank Tuning
- Cobb shift weight
- James Barone Racing front mount intercooler piping
- James Barone Racing bov tube
- Treadstone TR8L intercooler
- NGK 1-step colder plugs
- EGR delete
- coolant bypass kit
- Redline Tuning hood struts
- ATP GT2871r w/ GT3071 compressor                                                   
- J2 Engineering 3" catless downpipe
- MAC 3-port ebcs w/ Cobb 1/4" fittings
- Bosch 3-bar Map sensor w/ plug-n-play harness

Other for Sale/Wanted/Trade / FS: Canon Rebel T2i
« on: July 31, 2015, 12:54 AM »
Was bought brand new a few years ago. I've come to realize that a smaller point and shoot camera is all I need. I got tired of carrying around a larger camera when all I really need is something I can fit in my pocket. My original plan was to use this camera to get more into photography but that never panned out. This camera has honestly hardly been used and is in basically mint condition.
Comes with: -T2i body
                   -Canon EFS 18-55 lense
                   -Canon EFS 55-250 lense
                   -Battery wall charger
                   -Carrying case
                   -58mm Hoya UV filter that has never been used only opened to look at it

Will get photos tomorrow of everything showing the condition.

Looking to get $350 for everything. Price is pretty firm in that area.

Other for Sale/Wanted/Trade / found one. please close
« on: May 17, 2015, 08:08 PM »
found one. please close

Been installed for about a year, selling because I switched to a different mount. Was purchased brand new from Speed Factor for around $260 I believe.

It is well known that the stock rear motor mount on the MS3 is a weak link and cp-e™ has chosen to think outside the box on this and come up with a completely new design.


•Billet CNC construction
•EPDM Bushing to protect rubber from overheating
•Stainless Hardware
•Vertically mounted bushing increase’s durability.
•Machined additional pockets to create lightweight but strong mount.

Looking to get $140

Selling a Corksport Stage2 intake. Will work on either generation Speed3 and Speed6. Had it on for about a year. Filter could use a cleaning or just a new filter.
Selling because I upgraded to a different intake.


Pages: 1 2 3