Author Topic: LF: Somebody to weld a flex pipe  (Read 465 times)

April 22, 2016, 04:33 PM #0

Boyli Offline

  • Regular Member
  • Posts: 534
  • Join Date: May 2013
    Location: Winnipeg, MB, Canada
  • Real Name: Paul
  • Vehicle: 2007 Impreza, 1994 Camry
  • Reputation Power: 23
  • Boyli barely matters.Boyli barely matters.
As the title says, I'm looking for somebody to cut out my broken flex pipe and weld a new one in for a decent price. Already have a new flex pipe, just need it welded in. I could also cut the exhaust myself so it's ready to be welded.

    Top Tier Imports

    LF: Somebody to weld a flex pipe
    « on: April 22, 2016, 04:33 PM »

    April 22, 2016, 05:21 PM #1

    dolan Offline

    • Posts: 1,788
    • Join Date: Jul 2012
      Location: Winnipeg, MB
    • Real Name: Dyllan
    • Vehicle: 2000 civic si
    • Reputation Power: 0
    • dolan is looked down upon.
    Originally posted by Boyli
    As the title says, I'm looking for somebody to cut out my broken flex pipe and weld a new one in for a decent price. Already have a new flex pipe, just need it welded in. I could also cut the exhaust myself so it's ready to be welded.
    Duals
    Dyllan Angelkovski (aka) Dyllan Africa

    [Mar 27 22:16:27] Uncle Hugh Myron:i bet PEAVEY MART NOW OPEN has it

      April 22, 2016, 06:19 PM #2

      Boyli Offline

      • Regular Member
      • Posts: 534
      • Join Date: May 2013
        Location: Winnipeg, MB, Canada
      • Real Name: Paul
      • Vehicle: 2007 Impreza, 1994 Camry
      • Reputation Power: 23
      • Boyli barely matters.Boyli barely matters.
      Originally posted by dolan
      Duals
      Already called them as they had done the exhaust work initally. Was just looking to see if there was somebody on here that would do it on the side for a little cheaper.

        April 23, 2016, 01:28 PM #3

        Joe Offline

        • Posts: 776
        • Join Date: Oct 2012
          Location: Winnipeg
        • Real Name: Joe
        • Vehicle: MR2 Spyder
        • Reputation Power: 42
        • Joe might someday be someone...Joe might someday be someone...Joe might someday be someone...Joe might someday be someone...
        I guess the underlying question is how pretty do you want it to be.
        Ideally the flex should be tacked or fully welded in place with the exhaust in its proper position on the car.
        If done on a bench, when it's bolted in its at risk of being twisted or pulled a direction which will drastically shorten it's lifespan. 
        D Street #50 - Slicktop E46 323i
        04' Spyder 1E7 w/LSD - SOLD
        Project "Cookie Monster" - 96 Corolla DX
        http://forums.wscc.mb.ca/index.php?/topic/9745-the-cookie-monster/

          April 23, 2016, 02:27 PM #4

          Boyli Offline

          • Regular Member
          • Posts: 534
          • Join Date: May 2013
            Location: Winnipeg, MB, Canada
          • Real Name: Paul
          • Vehicle: 2007 Impreza, 1994 Camry
          • Reputation Power: 23
          • Boyli barely matters.Boyli barely matters.
          Originally posted by Joe
          I guess the underlying question is how pretty do you want it to be.
          Ideally the flex should be tacked or fully welded in place with the exhaust in its proper position on the car.
          If done on a bench, when it's bolted in its at risk of being twisted or pulled a direction which will drastically shorten it's lifespan. 
          Don't care how pretty it looks, as long as it does the job and doesn't leak. Right now I'm running open header and it's way too loud.

            April 26, 2016, 08:34 AM #5

            Boyli Offline

            • Regular Member
            • Posts: 534
            • Join Date: May 2013
              Location: Winnipeg, MB, Canada
            • Real Name: Paul
            • Vehicle: 2007 Impreza, 1994 Camry
            • Reputation Power: 23
            • Boyli barely matters.Boyli barely matters.
            Thread can be closed, my uncle is doing it today.

              Top Tier Imports

              LF: Somebody to weld a flex pipe
              « Reply #5 on: April 26, 2016, 08:34 AM »