Author Topic: Auxiliadora 1981 Honda CB750K Build  (Read 4125 times)

June 23, 2017, 12:03 AM #50

PRIME Offline

  • Regular Member
  • Posts: 495
  • Join Date: Mar 2012
    Location: Winnipeg, MB
  • Reputation Power: 11
  • PRIME has no influence.
No it's not done yet, get over it. :'(

quick update. Engines done. Freshly rebuilt with all new seals and rings.

Current to do list:
1. Get hardware (countersunk bolts)
2. Finish frame
3. Powder coat frame
4. Install engine
5. Wire bike
6. Make seat
7. Install everything
8. whatever else that's not on this never ending list

Here is some pictures ya filthy animals.








Honed the cylinders as new piston rings were installed









Last Edit: June 23, 2017, 12:16 AM by PRIME
PRIMEWORKS

[Apr 23 13:46:52] ACiFiC:ill suck your dick ryan
[May 15 23:40:54] ACiFiC:fuk me ryan

http://www.flickr.com/photos/99137668@N02/
https://www.facebook.com/pages/Primeworks/386662778053081

Avaliable for photoshoots, PM or email for details!

Ryanjaycee@hotmail.com

    Top Tier Imports

    Auxiliadora 1981 Honda CB750K Build
    « Reply #50 on: June 23, 2017, 12:03 AM »

    August 21, 2017, 05:31 PM #51

    PRIME Offline

    • Regular Member
    • Posts: 495
    • Join Date: Mar 2012
      Location: Winnipeg, MB
    • Reputation Power: 11
    • PRIME has no influence.
    Ok so it's been a while. Not a ton has happened since last posting but the reason for my absense was due to school and me finishing a summer class. Since last posting I've finished the frame completely with a friend of mind and have sent it off to get sandblasted and powder coated. I went with powder coating the frame gloss black because I wanted a stockish look but something that was durable. Now Im in the process of trying to figure out what left I have to get ready so that when the frame comes back from powder coating I can just reassemble everything (although I'm sure it will be harder then I think it will be since its been so long since the bike was in one piece).

    As of right now this is the list:

    1. Wire the bike

    I purchased a Motogadget M unit, M button, and the wiring kit for the M unit to simplifiy the wiring as much as possible. I'll start the wiring once I get the bike assembled for the most part becasuse I want to ensure the wiring is a neat as possible and well hidden.

    2. Get a seat made

    Kinda need the frame done for this to.

    3. Fix the carbs

    When I last rode the bike after getting a safety I found that one or two of the carbs seemed to just be pissing out fuel non stop. I read around and saw that some people say this is due to floats sticking but I just removed the bottoms of the carbs and the floats seem fine (atleast visually seeing as they move freely so I'm stumped). Anyone have any ideas about this? Cause the last thing I'd want is to have fuel on my freshly painted engine :(

    Also ordered some new headlight brackets. Nice simple look. As well as Motogadget M-blaze mini pin turn signals for the rear of my bike.


    PRIMEWORKS

    [Apr 23 13:46:52] ACiFiC:ill suck your dick ryan
    [May 15 23:40:54] ACiFiC:fuk me ryan

    http://www.flickr.com/photos/99137668@N02/
    https://www.facebook.com/pages/Primeworks/386662778053081

    Avaliable for photoshoots, PM or email for details!

    Ryanjaycee@hotmail.com

      August 28, 2017, 02:00 AM #52

      PRIME Offline

      • Regular Member
      • Posts: 495
      • Join Date: Mar 2012
        Location: Winnipeg, MB
      • Reputation Power: 11
      • PRIME has no influence.
      So I got the bike frame back from powder coating






      Got all the major stuff on. now it's time to install the controls, a few remaining engine parts, and wire everything up.

      One thing I didn't expect to be a problem however was the kick stand. Because the bike was lowered the kick stand is way to long to allow the bike to stand on its own properly so im a bit stumped. I may try and find a new short one online otherwise I'll be cutting and reweld the old one I think. Any suggestions? Also please note the bikes ride height has NOT been set in properly in these pictures. The bike does have suspension travel and the last picture is not what it will actually be.
      PRIMEWORKS

      [Apr 23 13:46:52] ACiFiC:ill suck your dick ryan
      [May 15 23:40:54] ACiFiC:fuk me ryan

      http://www.flickr.com/photos/99137668@N02/
      https://www.facebook.com/pages/Primeworks/386662778053081

      Avaliable for photoshoots, PM or email for details!

      Ryanjaycee@hotmail.com

        Top Tier Imports

        Auxiliadora 1981 Honda CB750K Build
        « Reply #52 on: August 28, 2017, 02:00 AM »